PACAF COVID Webpage

HomeNewsArticle Display

Kadena 3D prints shields in COVID-19 fight

U.S. Air Force Airman 1st Class Vaughn Piwowarski-Mason, 18th Munitions Squadron munition systems specialist, prepares to print a 3D face shield through modeling software April 15, 2020, at Kadena Air Base, Japan. Piwowarski-Mason uses his personal 3D printer in his dorm room to make face shields to help protect personnel from COVID-19.

U.S. Air Force Airman 1st Class Vaughn Piwowarski-Mason, 18th Munitions Squadron munition systems specialist, prepares to print a 3D face shield through modeling software April 15, 2020, at Kadena Air Base, Japan. Piwowarski-Mason uses his personal 3D printer in his dorm room to make face shields to help protect personnel from COVID-19. (U.S. Air Force photo by Airman 1st Class Mandy Foster)

U.S. Air Force Airman 1st Class Cyrus Bartony, 18th Equipment Maintenance Squadron aircraft metals technology journeyman, prepares a 3D printed face shield to be printed through modeling software April 9, 2020, at Kadena Air Base, Japan. The 18th EMS modified the original design so the mask could be assembled with supplies that are commonly found. The intention is to make a how-to guide for hospitals to print their own supply of personal protective equipment.

U.S. Air Force Airman 1st Class Cyrus Bartony, 18th Equipment Maintenance Squadron aircraft metals technology journeyman, prepares a 3D printed face shield to be printed through modeling software April 9, 2020, at Kadena Air Base, Japan. The 18th EMS modified the original design so the mask could be assembled with supplies that are commonly found. The intention is to make a how-to guide for hospitals to print their own supply of personal protective equipment. (U.S. Air Force photo by Airman 1st Class Mandy Foster)

A 3D printer creates a prototype face shield April 9, 2020, at Kadena Air Base, Japan. The 18th Equipment Maintenance Squadron works to produce mask frames and face shields for use in the fight against COVID-19.

A 3D printer creates a prototype face shield April 9, 2020, at Kadena Air Base, Japan. The 18th Equipment Maintenance Squadron works to produce mask frames and face shields for use in the fight against COVID-19. (U.S. Air Force photo by Airman 1st Class Mandy Foster)

U.S. Air Force Staff Sgt. Adrian Gonzalez and Airman 1st Class Cyrus Bartony, from the 18th Equipment Maintenance Squadron, work together to 3D print a face shield April 9, 2020, at Kadena Air Base, Japan. Gonzalez and Bartony are the 3D print programmers that helped design the models to print personal protective equipment during COVID-19.

U.S. Air Force Staff Sgt. Adrian Gonzalez and Airman 1st Class Cyrus Bartony, from the 18th Equipment Maintenance Squadron, work together to 3D print a face shield April 9, 2020, at Kadena Air Base, Japan. Gonzalez and Bartony are the 3D print programmers that helped design the models to print personal protective equipment during COVID-19. (U.S. Air Force photo by Airman 1st Class Mandy Foster)

Airmen from the 18th Security Forces Squadron receive 3D printed face shields April 10, 2020, at Kadena Air Base, Japan. The face shields are used to protect front-line workers, like security forces, who are interfacing with a large amount of people per day.

Airmen from the 18th Security Forces Squadron receive 3D printed face shields April 10, 2020, at Kadena Air Base, Japan. The face shields are used to protect front-line workers, like security forces, who are interfacing with a large amount of people per day. (U.S. Air Force Photo by Airman 1st Class Mandy Foster)

KADENA AIR BASE, Japan --

As experts search for vaccines, Personal Protective Equipment (PPE) shortages have become a critical issue during the outbreak of COVID-19. Many companies, individuals, and institutions have stepped up to fulfill this growing demand – Kadena Air Base is no exception.

By utilizing the resources and talents of Airmen across Team Kadena, the Wing Innovations team determined how to best assist their community.

It was decided that designing and printing face shields would be best in conserving medical PPE, explained Maj. Darrell A. Lee, Jr., 18th Wing Innovations chief.

"We were immediately able to see the challenges other innovation hubs were having within their wings and had the opportunity to pull our resources together to come up with a solution that fit our situation here,” he said.

The design began with a fabrication team from the 18th Equipment Maintenance Squadron that modified the original face shield design to use materials that are readily available.

“What's great about this effort is that we learned from other Air Force innovation hubs from around the globe to do what we can with our resources and technology to help the 18th Wing prepare for a potential spike in COVID-19 cases,” Lee explained.

Along with the 18th EMS, the 18th Dental Squadron also started printing face shields on the unit's 3D printer and guided the Shogun Spark Innovation Hub on how to use their 3D printers to maximize production.

Because of the team’s efforts, almost 100 face shields were distributed to the 18th Medical Group and Security Forces Squadron. Once there is a surplus of face shields, the Wing Innovations team will donate the excess to the Naval Hospital in Guam.

“The face shields we are making help protect our front-line workers, like Security Forces, who are interacting with a large amount of people every day,” Lee stated.

In order to maximize efforts, the Wing Innovations team put out a call to Airmen who have the experience and capability to 3D print. Four of Team Kadena’s very own volunteered to step up and assist with the printing.

From work centers to dorm rooms, leisure time to duty hours, printing face shields has been a unified effort across the 18th Wing.

“Our Wing Innovations team was able to concentrate and coordinate the Airmen’s abilities to come up with a solution that will ultimately help conserve our vital medical PPE and more importantly help protect our Airmen from this potential threat,” Lee said.

USAF Comments Policy
If you wish to comment, use the text box below. AF reserves the right to modify this policy at any time.

This is a moderated forum. That means all comments will be reviewed before posting. In addition, we expect that participants will treat each other, as well as our agency and our employees, with respect. We will not post comments that contain abusive or vulgar language, spam, hate speech, personal attacks, violate EEO policy, are offensive to other or similar content. We will not post comments that are spam, are clearly "off topic", promote services or products, infringe copyright protected material, or contain any links that don't contribute to the discussion. Comments that make unsupported accusations will also not be posted. The AF and the AF alone will make a determination as to which comments will be posted. Any references to commercial entities, products, services, or other non-governmental organizations or individuals that remain on the site are provided solely for the information of individuals using this page. These references are not intended to reflect the opinion of the AF, DoD, the United States, or its officers or employees concerning the significance, priority, or importance to be given the referenced entity, product, service, or organization. Such references are not an official or personal endorsement of any product, person, or service, and may not be quoted or reproduced for the purpose of stating or implying AF endorsement or approval of any product, person, or service.

Any comments that report criminal activity including: suicidal behaviour or sexual assault will be reported to appropriate authorities including OSI. This forum is not:

  • This forum is not to be used to report criminal activity. If you have information for law enforcement, please contact OSI or your local police agency.
  • Do not submit unsolicited proposals, or other business ideas or inquiries to this forum. This site is not to be used for contracting or commercial business.
  • This forum may not be used for the submission of any claim, demand, informal or formal complaint, or any other form of legal and/or administrative notice or process, or for the exhaustion of any legal and/or administrative remedy.

AF does not guarantee or warrant that any information posted by individuals on this forum is correct, and disclaims any liability for any loss or damage resulting from reliance on any such information. AF may not be able to verify, does not warrant or guarantee, and assumes no liability for anything posted on this website by any other person. AF does not endorse, support or otherwise promote any private or commercial entity or the information, products or services contained on those websites that may be reached through links on our website.

Members of the media are asked to send questions to the public affairs through their normal channels and to refrain from submitting questions here as comments. Reporter questions will not be posted. We recognize that the Web is a 24/7 medium, and your comments are welcome at any time. However, given the need to manage federal resources, moderating and posting of comments will occur during regular business hours Monday through Friday. Comments submitted after hours or on weekends will be read and posted as early as possible; in most cases, this means the next business day.

For the benefit of robust discussion, we ask that comments remain "on-topic." This means that comments will be posted only as it relates to the topic that is being discussed within the blog post. The views expressed on the site by non-federal commentators do not necessarily reflect the official views of the AF or the Federal Government.

To protect your own privacy and the privacy of others, please do not include personally identifiable information, such as name, Social Security number, DoD ID number, OSI Case number, phone numbers or email addresses in the body of your comment. If you do voluntarily include personally identifiable information in your comment, such as your name, that comment may or may not be posted on the page. If your comment is posted, your name will not be redacted or removed. In no circumstances will comments be posted that contain Social Security numbers, DoD ID numbers, OSI case numbers, addresses, email address or phone numbers. The default for the posting of comments is "anonymous", but if you opt not to, any information, including your login name, may be displayed on our site.

Thank you for taking the time to read this comment policy. We encourage your participation in our discussion and look forward to an active exchange of ideas.